Can You Use Pine-SOL On Wood Floors? How To Do?

For every homeowner, wood flooring is not only attractive but also long-lasting. It elevates them to a distinguished status. Regardless, hardwood floor owners are always thinking about how to maintain their floors looking good. Cleaning and maintaining your hardwood floors on a regular basis is an easy method to keep them looking their best. However, because the wood floor is in a high-traffic location, it will require more concentrated cleaning.

Pine-Sol is a useful cleaner, deodorizer, and disinfectant that has been around since 1929 and is safe for wood if used correctly. Applying pinesol on wood floors also helps disinfect the floor

What is Pine Sol?

Cleaning with pine-sol is quite rewarding. It’s a Clorox-based household cleaning product that’s used to remove tough dirt stains. Pine-sol is scented with real pine. It’s a marketing assertion that essential pine oil is aromatic. It was developed in 1929 and became popular in the 1950s. Though we know that organic pine sol contains pine oil, these cleansers are now available under the pine sol brand, which does not contain pine oil. Clorox Company’s product portfolio, on the other hand, featured “Clorox commercial pine sol Brand cleaner” in 2006. In addition, the Clorox firms use the same components. “original pine sol Brand Cleaner.”

Is Pine-Sol Good for Hardwood Floors?

In many houses, Pine-Sol is still a favorite. Pine-sol is an excellent cleaning product that can disinfect your floors while also leaving a lovely shine and pleasant aroma when applied correctly.

The original Pine-sol and the Pine-sol Squirt and Mop are both safe to use on hardwood floors. To clean non-porous finished hardwood floors and laminates, dilute 14 cup Pine-Sol original in 1 gallon of water. However, do not use it on an untreated wood floor because the residue may seep into the pores of the wood, potentially damaging it.

How to Use Pine Sol on the Hardwood Floor

It is effortless to use Pine-Sol to clean your hardwood floor. Just follow the given instruction.

Pre-cleaning preparation

Before you begin cleaning with Pine-Sol, remove any excess dust or grime from the floor. To remove pet hair and crumbs from your wood floor, use a dry mop, vacuum cleaner, or sweeping equipment.

Make a Mixture

Getting a bucket is the best option. In a bucket, mix a quarter cup of pine sol with a gallon of water. Make sure the solution is thoroughly mixed. Raw pine sol can be used on wood floors, but it is not recommended because it is too powerful for the floor. Instead, dilute with water.

How Do I Use Pine-Sol to Clean My Floor?

Hardwood floors may usually be kept at their best by vacuuming or dry cleaning them on a regular basis. If your floor is a high-traffic area or is becoming cloudy, you may want to give it a thorough cleaning.

Pine-Sol is very simple to use:

  1. Vacuum or hoover your floor.
  2. In a bucket, dilute 14 cup pine sol in 1 liter water.
  3. In the pail, dip a mop.
  4. Clean the floor gently in the direction of the grain of the wood.
  5. Make sure you don’t overdo it with the solution.
  6. Allow the floor to dry completely before stepping on it.
  7. On harsher stains, undiluted Pine-Sol can be used, but don’t use too much or too often or the floor will be damaged.

Spray the solution on an old toothbrush or a soft sponge and rub it in. Use a blunt object instead of a sharp one.

Make sure there’s no excess solution on the floor, as this might cause the wood to fracture and distort.

Frequently Asked Questions

Why is Pine-Sol leaving residue on my floor?

You’re not diluting Pine-Sol enough if it leaves residue on your floor. 14 cup Pine-Sol to a gallon of water should be your mopping solution. Using a greater Pine-Sol mixture can result in streaky, sticky floors.

Can you use Pine-Sol on laminate floors?

Yes, Pine-Sol may be used on laminate floors. To make your mopping solution, mop the floors first, then rinse them with a mop dampened in water. Too much water can damage the laminate, so don’t oversaturate your mop.

Do you have to rinse Pine-Sol off of floors?

Yes, after using Pine-Sol, you must rinse your floor. This can be done with a mop that has been soaked in water. After you’ve finished mopping, simply run it over your floors again.


Is Pine-Sol safe to use on wood floors? Yes, but make sure it’s properly diluted and that you rinse your flooring afterwards. If you don’t, you’ll probably end up with a product accumulation on your floors.

So, if you like the smell of Pine-Sol or if that’s all you have on hand, you can mop your woods with it. See more useful posts in my website

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button